Product Review: AquaGlide Chelan HB One Inflatable Kayak

Last summer, AquaGlide unveiled their inflatable kayak lineup for 2015, which included a series of new models and revamps. Based on the number of inquiries, we were anxious to try out the new Chelan HB high-pressure series.
As the new models arrived, we started inflating and testing – initially focusing on the longer AquaGlide Chelan HB Tandem and Columbia XP Tandem kayaks.

Our third AquaGlide review for 2015 focuses on the Chelan HB One, an 11′ 4″ long, high-pressure, inflatable kayak designed for solo paddling. (Please note: some of the information will be repeated from other writeups.)
Getting Started with the Aquaglide Chelan HB One:
We unpacked the box and laid out the pieces – inflatable kayak, backpack, instructions, repair kit, foot brace, tracking fin, seat, valve adaptor and two plastic splash guards.

Initial measurements showed the kayak body weighs approximately 22 lbs, with a folded size of 25 x 9 x 21 inches. The kayak with seat, fin and brace – all in the backpack – weighs 29 lbs with a backpack size of roughly 27 x 22 x 18 inches, which can be cinched down. All boxed up, the  dimensions are 27 x 23 x 14 inches with a shipping weight of 35 lbs. We were able to get everything – plus a pump and paddle – into the pack.
(AirKayaks Side note #1: When initially removing the kayak from the carrying case, take a good look at how the kayak is folded. This is probably the most overlooked step and it is VERY helpful when trying to get the kayak back into the bag.)
The included instructions appeared adequate and include diagrams with inflation details.

Set up is straight-forward and simple  – unpack, unfold, inflate.
There are three military valves (both sides and the floor) with one more small chamber utilizing a twistlock valve for the seat base.
The instructions say to pump up the floor first, to 6 PSI. As the floor is held in place with two adjustable straps, from prior experience, we found it best to loosen up the straps, making it easier to center if necessary.

The military-style plunger valve is simple to use – with your finger, twist the plunger slightly to the “up” position to inflate (air goes in but doesn’t come back out) and “down” to deflate (air comes out).

The Chelan HB One military valves require a special adaptor, which does not come with most standard pumps. In Aquaglide’s first year, the military adaptors were not included with the high-pressure kayaks. All the 2015 high pressure models now include the adaptor, which is found in the repair kit.
The Aquaglide military adaptor couples to the valve with a Boston valve adaptor; this is a common fitting, slightly conical and about 1/2 inch

Original Source: AirKayaks >>

Leave a Reply