We have avidly been awaiting the arrival of the 2018 Red Paddle Co product line. Recently, the truck rolled in and we had our first opportunity to take a look at the new Red Paddle inflatable SUPS, consisting of 23 models for surfing, whitewater, recreation, touring and racing, ranging in size from 8’10 to 22’0.
Attach the hose to the pump, making sure there is no cross-threading. Then attach the integrated adaptor on the end of the hose, to the board by pushing in and turning. You’re ready to pump!
We did measurement tests. The Voyager 12’6″ inflated is approximately 149.5 inches long, 32 inches wide, and just over 5.5 inches deep – pretty much on target with the published specs. Payload is up to 340 lbs/150 kgs.
Red Paddle Twelve Six Voyager On the Water
Besides being very fast and fun to paddle, it’s a great option for long days on the boards, or when the wind kicks up.
While I didn’t bring Cleo along this time, here is a photo of Eddie on an earlier version of the Race 12-6 shown above. Dog claws are no match for the beefy construction material.
Packing It Up
Deflating the board is pretty simple. Remove the tracking fin, making sure to re-attach the fin plate to the screw, so as not to lose it. Burp the plunger a couple of times to release some of the pressure, then push the plunger to the open (down) position and immediately the air will swoosh out. Remove the RSS battens. Move to the snout of the ISUP. Lay the Titan pump down and start tightly rolling up the board from the snout, top side up with the bottom on the outside. As you roll it up, air will continuously be pushed out of the open valve.
When fully rolled up, replace the valve cover and then take the attached strap and cinch it around the bundle. If you’ve rolled up tight enough, the board will easily slip back into the backpack. Put the fin into the interior pocket and use the interior cinch straps to position the load.
Red Paddle Twelve Six Voyager: Bottom Line