Tag Archives: Kokopelli XPD product review

Product Review: Rugged New 13lb Kokopelli XPD Inflatable Packraft

We recently posted our Sneak Preview on the new XPD inflatable packraft from Kokopelli Packraft – one of the exciting new models we’ve seen for 2020. What’s so special? While the XPD packraft is based on the Kokopelli Rogue-Lite profile, the XPD features a more beefed-up PVC construction for rigorous use on flat water and lakes through Class II.

Last week, the 2020 models started rolling in, so we begin our 2020 Kokopelli reviews with the 13.6 lbs XPD, which can be inflated to higher pressures of 2.75 PSI.
Getting Started with the Kokopelli XPD
We unpacked the box and laid out the pieces – inflatable packraft body (13.7 lbs), inflatable seat base (8 ozs), repair kit (4.1 ozs), Nano dual action hand pump with gauge (2 lbs), instructions and two 2 cinch belts( 1.6 oz each).

Boxed up, the dimensions are 29 x 20 x 8 inches with a shipping weight of just under 20 lbs. The packraft folded is roughly 24 x 20 x 8 inches, rolled it is roughly 25 x 8.5 inches.
The generic instructions for Kokopellli’s PVC series include inflation and deflation techniques, seat and backband installation (not found on the XPD but used in the Recon) but lack details on actual set up; we will outline the steps we took, below. In general, set up is straight-forward – unpack, unfold, inflate.

The first step is to unfold the packraft – it is remarkably flat – and orient yourself; the rear/stern is wider and has the inflation valve.

The Kokopelli XPD utilizes one main GRI push-push valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out). Before you go to all the effort of inflating the board, PLEASE make sure the plunger is in the inflate position.

Next, set up the pump – this is not mentioned in the instructions. Unlike most of the packrafts – which use inflator bags – the XPD comes with a very nifty, collapsible, dual-action Nano pump and built-in pressure gauge. Fold down the feet and attach the hose to the side that says Inflate. There are two pieces of plastic tubes in the plastic packaging – these are screw on handles. Unfortunately, there is no place to attach/store the handles when removed so you may want to purchase a mesh laundry bag to keep them together. Or, don’t even bother attaching the handles as the pump is pretty easy to use without them.

The Nano pump

Original Source: AirKayaks >>