Tag Archives: red explorer 12-6 review

Product Review: 2015 Red Air Explorer 12-6 Inflatable SUP from Red Paddle Co.

In late October, we received the first few 2015 Red Paddle Co. inflatable boards for review. As it had been two years since our previous writeup, we were excited when UPS backed up the truck and delivered a 2015 Red Air Explorer 12-6.

We first stumbled across the Red Air inflatable SUPs from Red Paddle Company in early 2012. Founded in 2007, Red Paddle Company is a UK-based business focused solely on the design and manufacture of inflatable paddle boards and accessories.
Well-known for their ruggedness, each of the Red Air boards utilize high pressure drop-stitch technology – allowing them to be inflated from 15-25 PSI – and feature quadruple rail construction and double layering. The larger boards come with the Red Air EZee pump, allowing one to inflate a paddle board in less than 10 minutes.
So, we opened the box and started getting ourselves reacquainted with the Explorer 12-6. (Please note, some of the information here will be repeated from other writeups.)
Red Air Twelve Six Explorer: Getting Started
The box as received weighs 47 lbs, measuring 37 x 15 x 15 inches.

Inside the box is the SUP body, EZee pump, pressure gauge, backpack, cinch belt, removable fin, instructions and repair kit – as well as a very neat bonus cell phone case.

Once rolled up, the SUP board and paddle fit into the backpack, as well as optional breakdown paddles under 37 inches. Weight is 43 lbs for backpack, board and pump, which all easily fit in the back of a small car. The board alone is approximately 35 lbs.
Red Air Twelve Six Explorer: Setup
The Red Air 12’6 Explorer inflatable SUP arrives rolled up around the EZee pump, inside the backpack. While there are French instructions in the box, you will find the English version folded up inside the cell phone case attached to the back pack.

For your first set up, remove and unroll the SUP body. Lay it out face up so that you can access the military valve.

The Red Air 12’6 Explorer utilizes one spring-loaded military valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out). Before you go to all the effort of inflating the board, PLEASE make sure the plunger is in the inflate position.

The included single-action pump comes with a pressure gauge, so you can monitor the board’s PSI. The gauge screws onto the pump – pull the pump handle up (so the pump body doesn’t

Original Source: AirKayaks >>

Product Review: 2015 Red Air Explorer 12-6 Inflatable SUP from Red Paddle Co.

In late October, we received the first few 2015 Red Paddle Co. inflatable boards for review. As it had been two years since our previous writeup, we were excited when UPS backed up the truck and delivered a 2015 Red Air Explorer 12-6.

We first stumbled across the Red Air inflatable SUPs from Red Paddle Company in early 2012. Founded in 2007, Red Paddle Company is a UK-based business focused solely on the design and manufacture of inflatable paddle boards and accessories.
Well-known for their ruggedness, each of the Red Air boards utilize high pressure drop-stitch technology – allowing them to be inflated from 15-25 PSI – and feature quadruple rail construction and double layering. The larger boards come with the Red Air EZee pump, allowing one to inflate a paddle board in less than 10 minutes.
So, we opened the box and started getting ourselves reacquainted with the Explorer 12-6. (Please note, some of the information here will be repeated from other writeups.)
Red Air Twelve Six Explorer: Getting Started
The box as received weighs 47 lbs, measuring 37 x 15 x 15 inches.

Inside the box is the SUP body, EZee pump, pressure gauge, backpack, cinch belt, removable fin, instructions and repair kit – as well as a very neat bonus cell phone case.

Once rolled up, the SUP board and paddle fit into the backpack, as well as optional breakdown paddles under 37 inches. Weight is 43 lbs for backpack, board and pump, which all easily fit in the back of a small car. The board alone is approximately 35 lbs.
Red Air Twelve Six Explorer: Setup
The Red Air 12’6 Explorer inflatable SUP arrives rolled up around the EZee pump, inside the backpack. While there are French instructions in the box, you will find the English version folded up inside the cell phone case attached to the back pack.

For your first set up, remove and unroll the SUP body. Lay it out face up so that you can access the military valve.

The Red Air 12’6 Explorer utilizes one spring-loaded military valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out). Before you go to all the effort of inflating the board, PLEASE make sure the plunger is in the inflate position.

The included single-action pump comes with a pressure gauge, so you can monitor the board’s PSI. The gauge screws onto the pump – pull the pump handle up (so the pump body doesn’t

Original Source: AirKayaks >>