Tag Archives: red paddles

Product Review: New 2017 Red Paddle Co Sport 11’3 MSL Inflatable SUP

As reported in our previous write-ups, the first Red Paddle Co inflatable paddle board models for 2017 started arriving in the States earlier this year.

Founded in 2007, Red Paddle Co. is a UK-based company which focuses solely on the design and manufacture of inflatable paddle boards and accessories – the Red Paddle Co boards are now well-known for performance, innovation and ruggedness. Each year, Red Paddle Co raises the industry bar with new models and new features, now sporting 22 models ranging in size from 8’10” to 22’0 for single to multi-paddlers.
Our first 2017 boards arrived in early September, and we were excited to try out one of the exciting new models in the lineup – the Sport 11’3.
So, following is our second write up on the Red Paddle Co 2017 line, with the 2017 Sport 11-3  – our first focused on the popular Ride 10-6. (Please note, some of this is repeated from previous writeups.)
Getting Started with the Red Paddle Co Sport 11’3″
The box as received weighs 39 lbs, measuring 38 x 15 x 15 inches.

Inside the box is the SUP body, roller backpack, Titan pump, pressure gauge, RSS fiberglass battens, FCS II fin, cinch belt, instructions, repair kit and cell phone case. Once rolled up, the SUP board and pump fit into the backpack, as well as a breakdown paddle under 37 inches.
Weight is 34 lbs for backpack, board and pump, which all easily fit in the back of a small car. The board alone is 22 lbs.
The 11-3 Sport inflatable SUP arrives rolled up around the high pressure Titan pump, inside the backpack. The instructions (Welcome Guide) are located in a mesh pocket inside the backpack. These include generic information on using the pump, using the valves, deflating the board, basic tips on using a paddle board, fin details and board care.

First step, unroll the SUP body. Lay it out face up (fins down) so that you can access the military valve.

The Red Paddle Sport 11-3 utilizes one spring-loaded military valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out).

The included Titan dual-barrel (or twin cylinder) pump comes with a built-in pressure gauge, so you can monitor the board’s PSI. It also now comes with multiple adaptors, which can be used on inflatable kayaks, dinghies and kite equipment. To start off, you will be using both barrels, allowing the board to be filled in less

Original Source: AirKayaks >>

Product Review: 2017 Red Paddle Co Ride 10’6″ Inflatable SUP with MSL

We first stumbled across the Red Paddle Co inflatable SUPs in early 2012.

Founded in 2007, Red Paddle Co. is a UK-based business focused solely on the design and manufacture of inflatable paddle boards and accessories, now well-known for performance, innovation and ruggedness. Each year, Red Paddle Co raises the industry bar with new models and new features, now sporting 22 models ranging in size from 8’10” to 22’0 for single to multi-paddlers.
In September, some of the new 2017 models arrived in the States. Having previously reviewed the Ride 10-6 in 2015, we decided to take a look at the new features on our biggest selling board.
Following is our write-up on the 2017 Ride 10’6″ from Red Paddle Company. (Please note, some of this is repeated from previous write ups.)
Getting Started with the Red Paddle Co Ride 10-6
The box as received weighs 39 lbs, measuring 38 x 15 x 15 inches.

Inside the box is the SUP body, roller backpack, Titan pump, pressure gauge, cinch belt, instructions, repair kit and a bonus cell phone case. Once rolled up, the SUP board and pump fit into the backpack, as well as a breakdown paddle with shafts under 37 inches.
Weight is 34 lbs for backpack, board and pump, which all easily fit in the back of a small car. The board alone is 21 lbs.
The 10’6 Ride inflatable SUP arrives rolled up around the high pressure Titan pump, inside the backpack. The instructions (Welcome Guide) are located in a mesh pocket inside the backpack. These include generic information on using the pump, using the valves, deflating the board, basic paddle boarding tips, fin details and board care.

Remove the fin guards and unroll the SUP body. (AirKayaks note: the fin guards should be considered packing materials, they are not meant to be permanently used.) There are three integrated tracking fins at the rear of the board. Lay it out face up (fins down) so that you can access the military valve.

The Red Paddle Ride 10’6 utilizes one spring-loaded military valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out). Before you go to all the effort of inflating the board, make sure the plunger is in the inflate position.
The included Titan dual-barrel (or twin cylinder) pump comes with a built-in pressure gauge, so you can monitor the board’s PSI. It also now comes with multiple adaptors, which can be used on inflatable kayaks,

Original Source: AirKayaks >>