Tag Archives: airkayaks.com

Product Review: Island Voyage 2 Inflatable Kayak from Advanced Elements

Feeds, , , , , , , , , , , , , , ,

This week we received our first shipment of the Island Voyage 2 inflatable kayak from Advanced Elements. New in 2015, the Island Voyage 2 is a recreational model with an open-design – allowing one to easily switch from single to tandem paddling – yet economically-priced at $399.

Following is our writeup on the Island Voyage 2, an 11 ft 2 inch kayak. Please note, some of this will be repeated from prior write-ups.
Getting Started with the Island Voyage 2
We unpacked the box and laid out the pieces – inflatable kayak, drawstring duffel bag, instructions, repair kit, tracking fin and two seats.

Initial measurements showed the kayak body weighs 25 lbs while the kayak with seats in the duffle is 30 lbs. The drawstring case is roughly 37 x 28 inches. Boxed up, the dimensions are 25 x 19 x 14 inches inches with a shipping weight of 35 lbs.
(AirKayaks Side note #1: When initially removing the kayak from the carrying case, take a good look at how the kayak is folded This is probably the most overlooked step and it is VERY helpful when trying to get the kayak back into the bag.)
Island Voyage 2 Inflatation and Setup
The included instructions appear adequate and include diagrams with inflation details.

Set up is straight-forward and simple  – unpack, unfold, inflate.

The first step is to attach the removable tracking fin, which enhances paddling/tracking in deeper water. Make sure the fin is pointing towards the rear of the kayak, then insert the front of the fin, pushing down and back, to lock the front end. Then move the fin back until the holes line up, and replace the retaining pin. At this point, pull up on the fin to make sure you have it locked in position. AirKayaks side note #2: You may want to bring along a towel, as the fin and bottom hull of the kayak are black, and become quite burning in the sun.

There are three inflation chambers utilizing Boston valves – the floor and two side chambers. Boston valves are two-part, screw-on valves. The bottom portion is threaded onto the kayak, the top valve is screwed open for inflation and then tightened shut after inflation. Air is easily released by unscrewing the base connector. How does it work? A flap inside the valve opens when air is pumped into the kayak, and falls shut when not pumped so that air will not rush back out.
(AirKayaks Side note #3: The Boston valves have a tether that keeps the valve attached to the kayak, ensuring that the valves don’t get lost after deflating. Make sure this does not get in the way when screwing on the valve base, and the valve is not cross-threaded, or

Original Source: AirKayaks >>

Choosing a Portable Breakdown Paddle for Inflatable Kayaks

Feeds, , , , , , , , , , , ,

So you’ve made the decision on an inflatable kayak. You’ve researched yourself to death, and have finally narrowed it down to the one that’s perfect for you. A sigh of relief – the hard part is over – until you find there are just as many choices, styles and incomprehensible terminologies for breakdown paddles.

Paddle lengths, materials, paddling styles, techniques – where to start?
Assuming that portability is the highest priority, AirKayaks has partnered with Accent and Cannon Paddles to help demystify the process of choosing a breakdown (or take-down) kayak paddle.
First of all, what is a breakdown kayak paddle?
Unlike a canoe paddle, which has one blade, shaft and handle grip, a kayak paddle features two blade heads (left hand and right hand) and a shaft.

The paddler grips the shaft with both hands, and dips one blade into the water and pulls, then dips the other side into the water and pulls. This is a more efficient method of paddling when sitting lower in the water.

While there are 2-pc breakdown paddles on the market, the most portable paddles are the 4-pc breakdown paddles consisting of two shaft lengths that connect into one, and two blades – a left hand and right hand – that attach onto the shaft. 4-pc breakdown paddles for inflatables typically have a longest shaft length of 25 to 30 inches in length, making them easily storable, often in the kayak carrying case.
What length should I look for?
Since inflatable kayaks are typically wider than hardshell kayaks, a 230 or 240cm paddle is considered a good length. For those confused with the measurement system, a 230cm paddle is 90.55 inches in length while a 240cm paddle is 94.5 inches in length (2.54 cm per inch).
The choice of either is a personal preference, but you should consider your height, paddling style and typical paddling conditions. In general, 230cm is good for persons under 6 feet, high-angle paddlers, and those in fast moving paddling conditions. Paddlers over 6 feet, low-angle paddlers and those in calmer touring conditions may be more comfortable with a 240cm, though our largest-selling paddle for inflatable kayaks is the 230cm size.
What is low and high angle paddling?
Low angle paddling keeps the blade more horizontal and can be less fatiguing.

It is often used for long-range touring, to save energy, in calmer waters and in wider kayaks.
With high angle paddling, the kayaker is lifting the blade up more perpendicular to the kayak.

This uses up more energy, but there is more power in each stroke, propelling one faster, making one more maneuverable and getting a solid workout. It is more aggressive but much more fatiguing.
Which material should I choose?
Our breakdown paddles are typically constructed of aluminum, fiberglass, carbon or a carbon

Original Source: AirKayaks >>

Sneak Preview: Advanced Elements Expedition LTD & AdvancedFrame LTD Inflatable Kayaks

Feeds, , , , , , , , , , , , , , ,

Earlier this month, Salt Lake City in Utah hosted the Outdoor Retailer Summer Show, one of the largest sporting goods events of the year. Nearly 1700 manufacturers – representing camping, cycling, water sports and outdoor activities – took this opportunity to showcase their 2015 line, unveiling new products and features to retailers around the world.

One of the major inflatable kayak manufacturers, Advanced Elements of Benicia, California, unveiled two limited edition models being introduced in 2015. The two popular models – Expedition and AdvancedFrame – feature two facelifts in limited production runs.
 

The Expedition LTD Limited Edition features a major color redesign, as well as some innovative design changes. Now in an Ocean Blue with orange graphics, the Expedition LTD sports a sleeker silhouette with integrated storage. A new “deck lift” – consisting of an aluminum bar – works in conjunction with the current integrated inflatable deck lifts, to create a sculpted look with more knee/legroom as well as shedding accumulated water.  A rear integrated storage hatch with rolltop closure provides easy access to paddling gear. MSRP $749.

The number-one selling AdvancedFrame has undergone a similar facelift, now in a hi-vis Lime Green with yellow graphics. The standard seat has been replaced with a stiffer, higher-backed version, providing more support. Velcro paddleholders are now standard. MSRP $549.
Both models feature new d-rings, making it easier to attach gear.
The Expedition LTD and AdvancedFrame LTD should be available in early 2015, in limited quantities.
Two new accessories for the 4-lb Packlite are also currently available. The Packlite Bellows Pump is a small-profile foot pump weighing just under 1 lb and capable of inflating to 2 PSI.

The Ultralite Paddle is a lightweight, 23.2 oz. 4 pc breakdown paddle with a longest shaft length of 23.5 inches. When bundled with the Packlite kayak and pump, the BakYaking package weighs in at 7 lbs. and sells for $350.
For more details and upcoming availability, watch the Advanced Elements product pages at http://www.AirKayaks.com. Or you can send us an email to get on the Advanced Elements LE Notification List.

Original Source: AirKayaks >>

Sneak Preview: New Windpaddle Downwind Kayak, Canoe and SUP Sails

Feeds, , , , , , , , , , , , , , , , ,

Windpaddle, Inc of Hood River, Oregon has recently redesigned two of their popular downwind sails for kayaks, canoes and SUPs – the Scout and Adventure.

The flagship Adventure model has been upgraded for better sailing and more power. The new Adventure features a 25% increase in sail size, up from 42 inches to 47 inches. With 12 square feet of sail area, a shallower draft and a stiffer batten, the Adventure’s new silhouette provides tighter control in windy conditions and better across-the-wind sailing and stability. Intended for longer touring and expedition kayaks of 14 to 18 feet, the Adventure has an off-wind sailing area of +/ 180 degrees and a wind range of up to 30 knots. The sheets/lines have been softened for more hand comfort while sailing.

The entry level Scout remains 42 inches in diameter, but now sports a larger clear panel for better visibility, and stiffer battens. Built for the casual recreational paddler, the Scout is intended for 4-18 knot conditions and smaller solo kayaks from 8 to 14 feet.
With the redesign comes a drop in price, with the Scout now starting at $99.95 and the Adventure at $149.95.  A limited supply of the older 42-inch Adventure model is still available at $129.95.
The Cruiser remains similar in design, with a 56 inch diameter, but a lower price point of $169.95. The larger sailing area is focused on longer tandem models.
The three sail models weigh from 13 to 22 oz. and can be coiled to a packed size of 15 to 20 inches. For hands-off sailing, an optional sail kit is available, allowing a paddler to tie off the lines and steer with their paddle. The sails are available in blue, yellow or red.
For more details or to purchase, visit the Windpaddle product pages at http://www.AirKayaks.com

Original Source: AirKayaks >>

Product Review: Klickitat One HB Whitewater Inflatable Kayak from AquaGlide

Feeds, , , , , , , , , , , , , , ,

We continue with our series on the new Aquaglide line of inflatable kayaks. Our previous reviews focused on the Chinook price-point line, the high-pressure Columbia touring series and the Deschutes recreational kayaks. We now move on to the high-pressure Klickitat whitewater models.

Following is our writeup on the Klickitat One HB, a 10-foot inflatable one-person self-bailing kayak selling for $599.
Getting Started with the Klickitat One:
We unpacked the box and laid out the pieces – inflatable kayak, backpack, instructions, repair kit, foot brace, tracking fin and seat.

Initial measurements showed the kayak body weighs 22 lbs, with a backpack size of roughly 27 x 22 x 12 inches, while the kayak with seat, fin and brace – all in the backpack – weighs 28 lbs. Boxed up, the dimensions are 33 x 20 x 17 inches with a shipping weight of 37 lbs.
(AirKayaks Side note #1: When initially removing the kayak from the carrying case, take a good look at how the kayak is folded This is probably the most overlooked step and it is VERY helpful when trying to get the kayak back into the bag.)
The included instructions are adequate and include diagrams with inflation details.

Set up is straight-forward and simple  – unpack, unfold, inflate.
There are three inflation chambers utilizing high-pressure military valves – the two side chambers and the floor. The floor is pumped up first.

The military-style plunger valve is simple to use – with your finger, twist the plunger slightly to the “up” position to inflate (air goes in but doesn’t come back out) and “down” to deflate (air comes out).

The Klickitat One HB floor requires a military valve adaptor, which does not come with most standard pumps. Here is where we came to our first issue, but one we already knew about from previous reviews – no military valve adaptor was included. In the interim, Aquaglide had shipped us a box of adaptors, so we were ready to keep going. (AirKayaks note #2: The first couple of Aquaglide shipments did not include the adaptor, but subsequent shipments will. We did obtain a number of fittings that we will be including with the first shipments.) Friction fit the military valve adaptor onto the Boston valve adaptor, then lock onto the military valve with a slight twist. Since the chambers are inflated from 3 to 12 PSI, it is helpful to use a pump with pressure gauge to ensure the kayak is inflated appropriately.

The floor is held in place with two straps. Pump up the floor to  at least 6 PSI – this took us about 20 complete pumps with a double action pump. While the instructions say it can be inflated up to 12 PSI, at 6 PSI it is

Original Source: AirKayaks >>

New Video: AquaGlide Columbia Tandem HB Inflatable Kayak for 2+ Paddlers

Feeds, , , , , , , , , , , , , , ,

Our fourth video in the AquaGlide inflatable kayak series! Check out our newest video on the Columbia Tandem HB  inflatable kayak.
The 15 ft Columbia Tandem HB inflatable kayak offers multiple seating arrangements with a capacity of 600 lbs. Perfect for one person with lots of gear, two adults, or with the included third seat – bring along a child or furry friend!  The Columbia Tandem HB features a high-pressure 6 to 12 PSI floor, making it extremely rigid and perfect for touring.  The comfortable seats sport fishing rod holders and it’s roomy enough to carry mega-gear. It’s rugged, fun and – with the included backpack – highly portable.

.
For more details or to purchase, see the Aquaglide Columbia Tandem HB product page at AirKayaks.com. Or read our Detailed Product Review of the Aquaglide Chinook Tandem Inflatable Kayak with Photos, here on our WordPress blog.

Original Source: AirKayaks >>

Product Review: Columbia Two HB Inflatable Kayak from AquaGlide

Feeds, , , , , , , , , , , , , , ,

We continue with our series on the new Aquaglide line of inflatable kayaks. Our first two reviews focused on the Chinook price-point line. Our third and fourth reviews featured two in the flagship Columbia line of high pressure inflatables; the Columbia One HB – a high-pressure touring model for one paddler, and the Columbia Tandem for 1-3 paddlers.

We’ve  now moved on to the Columbia Two HB, a 13.5 foot long inflatable kayak designed for one or two paddlers. (Please note: some of the information will be repeated from other writeups.)
Getting Started with the Aquaglide Columbia Two HB:
We unpacked the box and laid out the pieces – inflatable kayak, backpack, instructions, repair kit, foot braces, tracking fin and two Pro-Formance seats.

Initial measurements showed the kayak body weighs approximately 32.5 lbs, with a backpack size of roughly 27 x 23 x 14 inches, while the kayak with seats, fin and braces – all in the backpack – weighs 44 lbs. Boxed up, the dimensions are 30 x 29 x 15 inches with a shipping weight of 54 lbs. As a note, we were able to also get the pump in the case, with the paddles stuffed into the mesh pocket.
The included instructions are adequate and include diagrams with inflation details.

Set up is straight-forward and simple  – unpack, unfold, inflate.
(AirKayaks Side note #1: When initially removing the kayak from the carrying case, take a good look at how the kayak is folded This is probably the most overlooked step and it is VERY helpful when trying to get the kayak back into the bag.)
There are two inflation chambers utilizing Boston valves – the two side chambers – while the high-pressure floor features a military valve. There are two more small chambers with twistlock valves, for the seat bases. The floor is pumped up first.

The military-style plunger valve is simple to use – with your finger, twist the plunger slightly to the “up” position to inflate (air goes in but doesn’t come back out) and “down” to deflate (air comes out).

The Columbia Two HB floor requires a military valve adaptor, which does not come with most standard pumps. Here is where we came to our first issue – no military valve adaptor was included. We were aware of this from our previous write-ups and had one handy. (AirKayaks note #2: We spoke with AquaGlide. The first couple of shipments did not include the adaptor, but subsequent shipments will. We did obtain a number of fittings that we will be including with the first shipments.)
Lock the adaptor onto the conical Boston valve adaptor by friction fit, and then attach to the military valve with a slight twist. Since the main chambers are inflated to 2

Original Source: AirKayaks >>

Choosing an Aquaglide Inflatable Kayak: Columbia 2 HB vs Columbia Tandem HB

Feeds, , , , , , , , , , , , ,

This year, Aquaglide – a division of North Sports – launched their inflatable kayak line with a series of 13 models. The Columbia line sports two high-pressure tandem models – the Columbia Two HB and the Columbia Tandem HB.
A popular question is – which one should I choose?

The Columbia Two HB (photo above) is a 13.5 foot touring model with a sleek silhouette and long waterline; the Columbia Tandem HB (photo below) is a 15 foot stretched-out version. While there are many similarities, some of the differences are quite subtle. Ultimately it comes down to a personal preference, so here are some things to think about.

Both kayaks are made from the same materials, use the same valves and have the same 6-12 PSI high-pressure floor with 2 PSI side chambers. Both come with two ProFormance seats, fishing rod holders, splash decks, deck lacing, molded rubber handles, multiple d-rings, neoprene knuckleguards, velcro paddle holders, drain plugs, removable fin, foot braces and the same backpack.
Both the Columbia Two HB and Columbia Tandem HB utilize velcro floor strips and multiple d-rings to create infinite seating positions for one or two paddlers. And while they both sport an open design – making it easy to get in and out of – Aquaglide will be introducing single and double spray decks for the two models, allowing one to be in a more enclosed cockpit and utilize spray skirts.

At 13.5 feet in length with a weight of 44 lbs in the pack, the Columbia Two HB is lighterweight and shorter – easier to carry around solo in windy weather. It paddles well and has a great glide. With both seats positioned at their outer ranges, the Columbia 2 is a good tandem option for normal-sized adults, yet still is quite handle-able by one person as a solo. This is a great choice with people concerned about kayak size and weight, who don’t plan on long days of tandem touring, who want an open design yet the (upcoming) flexibility to be enclosed. As a solo with a 400 lbs capacity, it still has room for gear or a child/dog. And it costs slightly less.
The Columbia Tandem is 1.5 feet longer and weighs 5 lbs more (15 feet and 49 lbs). The long waterline makes it a great choice for extended (and short) range touring. It paddles well and has great glide. As a tandem with a weight limit of 600 lbs, there is plenty of room for gear or – with the included third jumper seat -a third smaller being.  Yet the Columbia Tandem is also versatile enough to be paddled by one.

We put the Columbia Two HB and Columbia Tandem HB next to each other to

Original Source: AirKayaks >>

Product Review: Deschutes Tandem HB Inflatable Kayak from AquaGlide

Feeds, , , , , , , , , , , , , , ,

We continue with our series on the new Aquaglide line of inflatable kayaks, now turning our sights on the Deschutes HB line of high-pressure recreational kayaks. Prior reviews focused on the Chinook price-point line, then moving on to the flagship Columbia line of high pressure inflatables.

We begin this series with the Deschutes Tandem HB 2+, a 12-foot long inflatable kayak designed with multiple seating positions for one or two paddlers – yet still with extra space for gear, child or pet. (Please note: some of the information will be repeated from other write-ups.)
Getting Started with the Aquaglide Deschutes HB Tandem:

We unpacked the box and laid out the pieces – inflatable kayak, backpack, instructions, repair kit, foot braces, tracking fin, two standard seats and a jumper seat.
Initial measurements showed the kayak body weighs approximately 34 lbs, with a backpack size of roughly 27 x 22 x 18 inches, while the kayak with seats, fin and braces – all in the backpack – weighs 45 lbs. Boxed up, the dimensions are 36 x 24 x 14 inches with a shipping weight of 56 lbs. Folded, the kayak body is 30 x 21 x 9 inches.
(AirKayaks Side note #1: When initially removing the kayak from the carrying case, take a good look at how the kayak is folded This is probably the most overlooked step and it is VERY helpful when trying to get the kayak back into the bag.)
The included instructions are adequate and include diagrams with inflation details.

Set up is straight-forward and simple  – unpack, unfold, inflate.
There are two inflation chambers utilizing Boston valves – the two side chambers – while the high-pressure floor features a military valve. There are three more small chambers with twistlock valves, for the seat bases. The floor is pumped up first.

The military-style plunger valve is simple to use – with your finger, twist the plunger slightly to the “up” position to inflate (air goes in but doesn’t come back out) and “down” to deflate (air comes out).

The Deschutes Tandem HB floor requires a military valve adaptor, which does not come with most standard pumps. Here is where we came to our first issue – no military valve adaptor was included. – but we were aware of this from our previous writeups on the Columbia and Klickitat series, and pulled one out of our parts box. (AirKayaks note #2: As previously mentioned, we spoke with AquaGlide. The first couple of shipments did not include the adaptor, but subsequent shipments will. We did obtain a number of fittings that we will be including with the first shipments.)
Friction fit the military valve adaptor into the conical Boston valve adaptor (found on most pumps) and then lock the adaptor

Original Source: AirKayaks >>

Choosing an Aquaglide Inflatable Kayak: Deschutes Tandem vs Columbia Tandem

Feeds, , , , , , , , , , , , ,

This year, Aquaglide – a division of North Sports – launched their inflatable kayak line with a series of 13 models. Two of the high-end models – the Deschutes Tandem and the Columbia Tandem – are high-pressure versions that can be ulitized by 2+ paddlers.
We often get questions – which one should I choose?

The Columbia Tandem (photo above) is a 15 ft touring model with a sleek silhouette and long waterline, while the Deschutes Tandem (photo below) is a 12 ft recreational model built for comfort and stability. While they have many similarities, there are just as many differences. Ultimately your choice comes down to a personal preference, but here are some things to think about.

Both kayaks are made from the same materials, use the same valves and have the same 6-12 PSI high-pressure floor with 2 PSI side chambers. Both come with two ProFormance seats, fishing rod holders, spray decks, deck lacing, molded rubber handles, multiple d-rings, neoprene knuckleguards, velcro paddle holders, drain plugs, a third jumper seat, removable fin, foot braces and the same backpack. Both the Deschutes Tandem and Columbia Tandem have a carrying capacity of 600 lbs, and utilize velcro floor strips and multiple d-rings to create infinite seating positions for one or two paddlers while still leaving room enough for gear, a child or furry friend.

At 12 feet in length with a weight of 42 lbs in the pack, the Deschutes Tandem is lighterweight and shorter – easier to carry around solo in windy weather. The wider beam is slightly more stable, but it’s not as quite as nimble. It paddles well, with less glide. This is a great choice with people concerned about kayak size and weight, who don’t plan on long days of touring, who want an open design and aren’t concerned about colders waters or wind, who want to have some fun on the water, or maybe a day of fishing, without sacrificing versatility – it can be paddled by one or two, yet still has room for gear or a third smaller being. And it costs slightly less.
The Columbia Tandem is 3 feet longer and weighs 7 lbs more (15 feet and 49 lbs). The long waterline makes it a great choice for extended (and short) range touring. It paddles well and has great glide.  There is plenty of room for gear or a third smaller being, yet is versatile enough to be paddled by one. While it sports an open design – making it easy to get in and out of – Aquaglide will be introducing single and double spray decks, allowing one to be in a more enclosed cockpit and utilize spray skirts.

We put the Columbia and Deschutes Tandems

Original Source: AirKayaks >>