This year, we had our first hands-on experience with Mistral’s inflatable SUP line. Well-known for decades as a leader in windsurfing, the Mistral line originated in northwest US, but is now based out of Europe. Most recently, Mistral has forayed back into the US market, bringing their expanding inflatable SUP lines built in both Europe and Asia.
Our first two Mistral reviews focus on the Asian-produced boards, beginning with the Mistral Kailua inflatable paddle board – an 11 foot SUP touted as a fitness board, but also a great standup paddle board and sit-on-top.
Now we check out the Mistral Adventure inflatable SUP, an all-round cruiser designed for a wide range of conditions from flatwater lakes to oceans and rivers. The Adventure comes in two sizes – the Adventure 10-5 and Adventure 11-6. For this review, we chose the Adventure 11-6 inflatable SUP.
(Please note: some of the info will be repeated from prior writeups.)
Mistral Adventure 11’5 Inflatable Standup Paddle Board – Getting Started
The board as-arrived is 34 x 19.5 x 11 inches in the box, weighing in at 38 lbs.
Inside is the Adventure body, backpack, repair kit, single action pump with pressure gauge, removable fin and instructions (inside front zippered pocket). Once rolled up, the SUP board fits into the backpack, as well as a breakdown paddle under 35 inches (longest shaft length) – if an excellent packer, the pump will fit inside too, or it can be attached to the outside of the bag. The board itself weighs 27 lbs, or 33 lbs inside the backpack with pump – these all easily fit in the back of a small car.
For your first set up, remove the SUP body from the backpack, and unroll. Lay it out face up so that you can access the military valve.
The Adventure 11-5 utilizes one spring-loaded military valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out) – before you make the effort to inflate the board, PLEASE make sure the plunger is in the inflate position.
The Adventure paddle board system includes a high-pressure, single-action pump with a gauge – what we term the “slim barrel” as it pushes out a bit less air, making it easier to attain very high pressures. Recommended board pressure is 15 PSI.
First, hook the gauge onto the pump then attach the hose to the gauge. Push and twist the military valve adaptor onto the valve, and lock into