Product Review: Chelan HB Two Inflatable Kayak from Aquaglide – for 1-2 paddlers

Last summer, AquaGlide unveiled their new inflatable kayak lineup for 2015, which included a series of new models and revamps. Based on the number of inquiries, we were anxious to try out the new Chelan HB high-pressure series.
The new models arrived earlier this year, and we started inflating and testing, beginning with the Chelan HB Tandem XL and Chelan HB One. This was followed by the Columbia XP Tandem XL, Chinook One and Panther.

Our sixth 2015 review focuses on the Chelan HB Two, a 13.5 foot long inflatable kayak designed for one or two paddlers. At this time, we will point out that the AquaGlide kayak models are named after rivers in Washington State, and the river is pronounced “shuh-LAN.”
(Please note: some of the information will be repeated from other writeups.)
Getting Started with the Aquaglide Chelan HB Two:
We unpacked the box and laid out the pieces – inflatable kayak, backpack, instructions, repair kit, foot braces, tracking fin, two seats,  valve adaptor and two pieces of plastic.

Initial measurements showed the kayak body weighs approximately 27 lbs, with a backpack size of roughly 27 x 22 x 18 inches, while the kayak with seats, fin and braces – all in the backpack – weighs 38.5 lbs. Boxed up, the dimensions are 26 x 25 x 12 inches with a shipping weight of 46 lbs.
(AirKayaks Side note #1: When initially removing the kayak from the carrying case, take a good look at how the kayak is folded. This is probably the most overlooked step and it is VERY helpful when trying to get the kayak back into the bag.)
The included instructions appeared adequate and include diagrams with inflation details.

Set up is straight-forward and simple  – unpack, unfold, inflate.
There are three military valves (both sides and the floor) with two more small chambers utilizing twistlock valves for the seat bases – the floor is pumped up first, to 6 PSI.
The floor is held in place with two adjustable straps. From our prior experience, we found it best to loosen up the straps, otherwise the floor could be inflated “lopsided.”

The military-style plunger valve is simple to use – with your finger, twist the plunger slightly to the “up” position to inflate (air goes in but doesn’t come back out) and “down” to deflate (air comes out).
The Chelan HB Two military valves require a special adaptor, which does not come with most standard pumps. In Aquaglide’s first year, the military adaptors were not included with the high-pressure kayaks, which caused problems. All the 2015 high pressure models now include the adaptor, which is found in the repair kit.

The Aquaglide military adaptor couples to the valve with a Boston valve adaptor; this is a common fitting, slightly

Original Source: AirKayaks >>

Leave a Reply