Product Review: New Innova Twist 2 N Inflatable Tandem Kayak

In June we received our first shipment of the newly-updated Innova kayaks for 2019 – in particular the Twist N, Swing N and Solar 2019. Made in the Czech Republic, the Twist and Swing models are now constructed from Nitrilon (N), the same rugged material used in the traditional Innova Sunny, Helios and Safari models. Nitrilon is known for making the kayaks more rigid as well as water and abrasion resistant, without substantially increasing weight. It’s also PVC-free, thus environmentally friendly.

Our first selection was a review on the Twist II N. The Twist 2 interior has been redesigned slightly to include additional d-rings, providing an easy conversion from a tandem to a solo kayak, thus more versatile for larger paddlers or those needing more space for extra gear. While the kayak silhouette remains virtually unchanged, the added material thickness increased the kayak weight from 24 lbs to 29 lbs as well as a price increase.
This week we had the first opportunity to take out the revamped Innova Twist II N, an 11 foot 10-inch two-person inflatable weighing a mere 29 lbs (including seats and foot brace) with a selling price of $599.
Please note: Some of this information will be repeated from prior write-ups.
Innova Twist IIN: Getting Started
The box as received measures 23 x 16 x 10 inches, weighing in at 32 lbs.

Inside is the Twist II N body, cinch strap, multiple instruction sheets, tracking fin, foot rest, repair kit, two seats, bilge sponge, valve adaptor and a drawstring stuff-sack. The Twist II N body with seats and brace weighs 28 lbs with a folded size of 20 x 16 x 8.
Innova Twist 2 N Inflatable Kayak Setup/Inflatation
We read through the included instruction manuals. As with all the Innova manuals to date, the instructions are quite detailed – there is one instruction sheet for fin installation, one for utilizing the valves, one on refolding and another on the kayak in general. Most include IKEA-style graphics which are occasionally just short of a brain twister, and while some steps are dauntingly detailed, some are not mentioned. As the kayaks are made in Europe, many of the details are based around European specs and regulations.

First step, unpack and unfold the kayak body.

What is immediately noticeable is how FLAT the kayak is when deflated.

Install the tracking fin before inflating the kayak. The Twist II N utilizes a single fin with double slots. Slip the end with the larger slot in first, making sure that the fin is pointing towards the “back” of the kayak. This enables it to slide in enough to fit in the second slot. While the first time can be a struggle to get the back side into position, after a

Original Source: AirKayaks >>

Leave a Reply