Product Review: Island Voyage 2 Tandem Inflatable Kayak from Advanced Elements

Earlier this year we received first of several shipments which included the Island Voyage 2 inflatable kayak from Advanced Elements.

Introduced in 2015, the Island Voyage 2 is a recreational model with an open-design – allowing one to easily switch from single to tandem paddling – yet economically-priced at $399. In the ensuing six years, the Island Voyage has undergone minor redesigns and tweaks, prompting us to update our previous reviews.
As the kayak kept selling out before we could snag one, we immediately set one aside from the last shipment. Following is our write-up on the AE3023Y Advanced Elements Island Voyage 2, an 11 ft 2 inch kayak that can be paddled by one or two people. Please note, some of this will be repeated from prior write-ups.
Getting Started with the Island Voyage 2
We unpacked the box and laid out the pieces – inflatable kayak, drawstring duffel bag, instructions, repair kit, tracking fin and two seats.

Initial measurements showed the kayak body weighs 25 lbs while the kayak with seats in the duffel is 31 lbs. Boxed up, the dimensions are 25 x 22 x 16 inches inches with a shipping weight of 41 lbs.
(AirKayaks Side note #1: When initially removing the kayak from the carrying case, take a good look at how the kayak is folded This is probably the most overlooked step and it is VERY helpful when trying to get the kayak back into the bag.)
The included instructions are adequate on most steps and include diagrams with inflation details.

Set up is straight-forward and simple – unpack, unfold, inflate.

According to the instructions, the first step is to attach the removable tracking fin, which enhances paddling/tracking in deeper water.

Make sure the fin is pointing towards the rear of the kayak, then insert the front of the fin, pushing down and back, to lock the front end.

Move the fin back until the holes line up and replace the retaining pin. At this point, pull up on the fin to make sure you have it locked in position.

There are three inflation chambers utilizing Boston valves – the floor and two side chambers. Boston valves are two-part, screw-on valves. The bottom portion is threaded onto the kayak, the top valve is screwed open for inflation and then tightened shut after inflation.

Air is easily released by unscrewing the base connector. How does it work? A flap inside the valve opens when air is pumped into the kayak, and falls shut when not pumped so that air will not rush back out.
Please note: The Boston valves have a tether that keeps the valve attached to the kayak, ensuring that the valves don’t get lost after deflating. Make sure this does not get in the way when

Original Source: AirKayaks >>

Leave a Reply