This past month we received our first shipment of standup inflatable paddle boards from Mistral.
Founded in 1972, European-based Mistral rapidly became one of the leaders in the windsurf industry. Mistral has since refocused the product line, branching into paddle boards and kite surfing – even watches and clothing.

Recently, Mistral expanded into the inflatable SUP market. The 2015 line includes the popular all-around Adventure boards, a fitness-oriented board named the Kailua Fit, and a new line of high-pressure, lightweight, sub-20 lb. boards made in Europe – the Equipes and Crossovers. With the introduction of the new Crossover inflatable WindSup boards, Mistral is brought full-circle, back to their roots.
Our first review features the Mistral Kailua Fit, an 11′ 5″ inflatable paddle board decked out for stand up paddling as well as yoga/fitness workouts.
(Please note: some of the info will be repeated from prior write-ups.)
Mistral Kailua Fit 11’5 Inflatable Yoga Standup Paddle Board – Getting Started
The board as-arrived is 33 x 18 x 10 inches in the box, weighing in at 34 lbs.

Inside is the Kailua body, backpack, repair kit, single action pump with pressure gauge, removable fin, fitness cord and instructions. Once rolled up, the SUP board fits into the backpack, as well as a breakdown paddle under 35 inches (longest shaft length) and the pump.

The board itself weighs 24.6 lbs, or 28.8 lbs inside the backpack with pump – these all easily fit in the back of a small car.

For your first set up, remove the SUP body from the backpack, and unroll. Lay it out face up so that you can access the military valve.

The Kailua 11-5 utilizes one spring-loaded military valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out) – before you make the effort to inflate the board, PLEASE make sure the plunger is in the inflate position.
The Kailua paddle board system includes a high-pressure, single-action pump with a gauge – what we term the “slim barrel” as it pushes out a bit less air, making it easier to attain very high pressures.

First, hook the gauge onto the pump then attach the hose to the gauge. Push and twist the military valve adaptor onto the valve, and lock into position – you’re ready to pump!

Initial pumping is a breeze. I pumped for about 180 strokes (3+ minutes) until the board filled out and the gauge started to move. With another 50 strokes I was at

Original Source: AirKayaks >>