Tag Archives: sport 12-6 review

Product Review: New 2016 Red Paddle Co Sport 12’6″ Inflatable SUP Board

We have avidly been awaiting the arrival of the 2016 Red Paddle Co product line. Recently, the truck rolled in and we had our first opportunity to take a look at the new Red Air inflatable SUPS, consisting of 17 models. New for this year are three boards – the 8’10” Whip, the Explorer Plus 13’2″, and the Sport 12’6″.

Founded in 2007, Red Paddle Company is a UK-based business focused solely on the design and manufacture of inflatable paddle boards and accessories.
For 2016, Red Paddle Co has streamlined many of the current models, focusing on technology improvements; the mantra this year is “stronger, stiffer, lighter.” And indeed, the new product line is quite a bit lighter. The introduction of a technological advance termed MSL (Monocoque Structural Laminate) fusion technology has resulted in boards that weight up to 10 lbs lighter than previous models, without sacrificing soundness or rigidity.
Included in this shipment is the new Sport 12-6 ISUP – a 30-inch wide, sleek, inflatable cruising model reminiscent of the original Race 12’6″ – featuring 150mm drop-stitch material and the revolutionary new rocker stiffening system (RSS).
So we begin our first in the series on the new 2016 models, featuring the Sport 12-6. (Please note: Some of this will be repeated from previous write-ups.)
Red Paddle Co Sport 12-6: Getting Started
The box as received weighs 39.5 lbs, measuring 37 x 15 x 15 inches.

Inside the box is the SUP body, two RSS side battens, Titan dual-barrel pump, pressure gauge, backpack, cinch belt, removable fin, instructions and repair kit – as well as a bonus cell phone case. Once rolled up, the SUP board and paddle fit into the backpack, as well as optional breakdown paddles under 37 inches.

Weight is 35 lbs for backpack, board and pump, which all easily fit in the back of a small car. The board alone is approximately 23 lbs.
The Red Paddle Sport 12-6 inflatable SUP arrives rolled up around the high pressure Titan pump, inside the backpack.
Instructions are located inside the cell phone case, attached to the zipper pull on the bag.

For your first set up, remove and unroll the SUP body. Lay it out face up so that you can access the military valve.

The Red Air Sport 12-6 utilizes one spring-loaded military valve for inflation. These are very simple to use and feature a deflate mode (spring plunger is DOWN) and inflate mode (spring plunger is UP). By using your finger to push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out). Before you go to all the effort of inflating the board, PLEASE make sure the plunger

Original Source: AirKayaks >>