Tag Archives: Inflatable Kayaks, SUPS & Canoes

Product Review: Innova Thaya Hi-Pressure Inflatable Kayak for 1 to 2+ paddlers

Feeds, , , , , , , , , , , ,

Earlier this year we had the opportunity to take our first look at Innova’s new Thaya inflatable kayak – a 2+ person, high-pressure, inflatable kayak  for recreational paddling.

The Innova line is unique for a number of reasons. First, the kayaks are handmade in the Czech Republic – the factory has manufactured inflatable boats for well over 50 years. Secondly, the manufacturing process produces kayaks that can become quite compact, making them a great choice for travel. And third, the kayaks are environmentally-friendly as they are mostly PVC-free.

The Thaya is the newest introduction to the US market, already garnering a gold model at the 2019 European Paddlesport sProduct of the Year Awards, based on stability, paddling performance and its environmentally-friendly footprint.
While it is not yet available in the states (due in May 2019) we received an early production line piece for review. So here is our write-up on the the Innova Thaya inflatable tandem kayak, which weighs 39 lbs, is 13 feet 5 inches in length and has a payload of 595 lbs for two persons and gear. (Please note: some of the information will be duplicated from other Innova reviews).
Getting Started with the Innova Thaya
The box as received measures 28 x 19 x 13 inches, weighing in at 44 lbs.

Inside is a very nifty and compact 80-liter backpack with adjustable shoulder straps, front pouch pocket and roll top closure. This contains the kayak body, tracking fin, 2 foot rests, repair kit, instructions, valve adaptor, cinch belt, 2 seats and sponge. Packed dimensions are 25 x 16 x 10 inches as received in the bag, with a weight of 40.75 lbs for the pack and contents.
We read through the included instruction manuals. Just like all the Innova products, the Innova Thaya manual is surprisingly detailed in some aspects, while lacking in others. As the kayaks are made in Europe, many of the details are based around European specs and regulations and can sound more complicated than it actually is.
First step, unpack and unfold the kayak body. What is immediately noticeable is how FLAT the kayak is when deflated – of course, this makes it quite compact for travel.

Install the tracking fin into the “shoe” before inflating the kayak. Slip the end with the larger slot in first, making sure that the fin is pointing towards the “back” of the kayak. This enables it to slide in enough to fit in the second side. The first time we tried this, we struggled to get the second slot into position but this gets easier with use.
Next, decide which paddling mode you will be doing – solo, tandem or tandem with small being or gear. The instructions suggest attaching and inflating the foot braces

Original Source: AirKayaks >>

Choosing Your Advanced Elements Convertible, Convertible DS or Convertible Elite Inflatable Kayak

Feeds, , , , , , , , , , , , , , , ,

Earlier this year we received our first shipment of Advanced Elements’ new model, the AE1007E Convertible Elite in red: the Convertible is a popular tandem inflatable kayak for one to two paddlers. This joined the current models, the Convertible AE1007R or Convertible AE1007G in red or green and the AE1007 Convertible DS in blue.  Before they arrived, we were fielding inquiries on all three models which came down to one basic question – what is different?
In a nutshell, all three kayak models are identical in construction, materials and footprint – the only variations are in the colors and included accessories.
Standard AE1007G and AE1007R

The standard Convertible has been available for nearly 15 years, and now comes as AE1007G and AE1007R. These are identical except for the color – green or red – and come with a low-pressure 1-PSI inflatable floor with i-beams and pressure relief valve. Both have high-backed seats and come with the standard Advanced Elements duffel-style carry bag. Both have a street price of $699.
Convertible Elite and Convertible DS

Both the Convertible Elite AE1007E and Convertible DS AE1007DS come with the hi-pressure 4-6 PSI drop stitch floor (shown above with the standard 1 PSI low-pressure floor), which greatly enhances paddling performance and rigidity. The drop stitch floor ($239 value) also provides a firmer surface for getting into – and out of – the kayak. Both of these also come with two upgraded, high-backed seats with inflatable lumbar support ($128 value), and an additional padded seat bottom, providing a more comfortable paddling experience. Both of these also include a carrying case with backpack straps ($107.95 value), making it easier to transport. The new AE1007E Convertible Elite is available in red, with a street price of $949.

The Convertible DS AE1007DS in blue is exclusive to AirKayaks, and has been available for nearly 5 years.

In addition to the floor, seats and backpack upgrades listed previously, the current version also includes an integrated, adjustable front foot brace system ($29.99 value).

The base kayak also includes the Advanced Elements double action hand pump with gauge ($39.99 value) as well as a bonus StashPack 20 Liter dry bag ($49.99 value). Street price is $899.
Bottom Line:
If you plan on doing mostly tandem recreational paddling on calmer waters, don’t need all the whiz-bangs, or are on a budget, then the basic Convertible AE1007R/G with 1-PSI floor might be your best choice at $699.
If you plan on paddling in a variety of conditions both tandem and solo, with comfort and performance as a priority, then go with the high-pressure versions. For at-a-glance comparison, see the table below.

For more info, or to purchase, visit the Convertible product pages on AirKayaks.com.

AE1007R Convertible Inflatable Kayak in Red.
AE1007G Convertible Inflatable Kayak in Green
AE1007E Convertible

Original Source: AirKayaks >>

Product Review: Red Paddle Co Compact 9’6″ x 32″ Inflatable SUP Package

Feeds, , , , , , , , , , , , , , ,

This past summer, Red Paddle Co announced the launch of their new 9’6″ Compact Inflatable SUP Package, a revolutionary game-changer in the inflatable paddle board industry.

With the Compact 9’6,” Red Paddle Co introduced the revolutionary PACT technology. Ten years in the making, PACT technology is a new weaving process which creates a denser, high-tensile thread matrix at the core of the board, with a super-strong, malleable outer layer. The Compact 9’6″ utilizes 120mm dropstitch technology, making the board more rigid than many boards yet still allowing the rider to keep a low center of gravity.

Deflating the board is pretty simple. Disassemble the paddle and put into the backpack. Remove the tracking fins and store in the bag. Burp the plunger a couple of times to release some of the pressure, then push the plunger to the open (down) position and immediately the air will swoosh out. Roll up the board from the nose to initially push out most air, and then unroll and fold the board in half down the centerline. Lay the Titan pump down on the nose end and start tightly rolling up the board from the snout. As you roll it up, air will continue to be pushed out of the open valve.

Original Source: AirKayaks >>

Product Review: Red Paddle Co Compact 9’6″ x 32″ Inflatable SUP Package

Feeds, , , , , , , , , , , , , , ,

This past summer, Red Paddle Co announced the launch of their new 9’6″ Compact Inflatable SUP Package, a revolutionary game-changer in the inflatable paddle board industry.

With the Compact 9’6,” Red Paddle Co introduced the revolutionary PACT technology. Ten years in the making, PACT technology is a new weaving process which creates a denser, high-tensile thread matrix at the core of the board, with a super-strong, malleable outer layer. The Compact 9’6″ utilizes 120mm dropstitch technology, making the board more rigid than many boards yet still allowing the rider to keep a low center of gravity.

Deflating the board is pretty simple. Disassemble the paddle and put into the backpack. Remove the tracking fins and store in the bag. Burp the plunger a couple of times to release some of the pressure, then push the plunger to the open (down) position and immediately the air will swoosh out. Roll up the board from the nose to initially push out most air, and then unroll and fold the board in half down the centerline. Lay the Titan pump down on the nose end and start tightly rolling up the board from the snout. As you roll it up, air will continue to be pushed out of the open valve.

Original Source: AirKayaks >>

Product Review: Rival Nass 12’0″ Inflatable Paddle Board from Hala Gear

Feeds, , , , , , , , , , , , ,

Well-known for eye-catching graphics and innovative technology, Hala Gear is one of the few standup paddle board companies focused on the inflatables market – most feature hard-shells with a few inflatables thrown into the mix.

Founded in 2011 by Peter Hall, Hala Gear headquarters is based out of Steamboat Springs, Colorado. The company philosophy is centered on performance, durability and quality – in fact, each of the Hala inflatable boards carries a three-year manufacturer’s warranty.
For 2018, Hala has 20 models for surfing, whitewater, recreation, touring and racing ranging in size from 6’11” to 14’0.
Our first review centered on the Carbon Nass with Hala’s unique carbon stringer. Based on that, we opted to test out the economy version Rival Nass package, which features the roller pack, dual-action pump and a breakdown paddle – part of Hala’s “Straight to the Water” package series.
So, here is our product review on the Rival Nass inflatable SUP, a 12’0 by 32″ x 6″ recreational and touring model from Hala Gear.
Hala Rival Nass 12’0″: Getting Started
The box as received weighs 42 lbs, measuring 39 x 22 x 12 inches.

Inside the box is the SUP body, high-pressure dual-action pump, pressure gauge, roller backpack, cinch belt, removable blue race fin, breakdown paddle, instructions and repair kit with valve wrench, fin plate and patch material (no glue) – as well as a bonus 12-volt car pump. Once rolled up, the SUP board and pumps fit into the backpack, as well as the paddle.
Weight is 35.5 lbs for backpack, board, paddle and pump, which all easily fit in the back of a small car. The board alone is 23 lbs, while the pump is 2.5 lbs, the paddle is 2.35 lbs and the backpack 5.4 lbs.

For your first set up, remove and unroll the SUP body. Lay it out face up so that you can access the military valve.

The Hala Rival Nass 12’0″ utilizes one spring-loaded military valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out). Before you go to all the effort of inflating the board, PLEASE make sure the plunger is in the inflate position.
If using only the dual action pump, you will pump up the board in the UP (inflate mode) position.

If you are near your vehicle, you can start off with the included 12-volt car pump, which uses a slightly different process. Insert the cord into the car power point, and then extend the

Original Source: AirKayaks >>

Product Review: New Hi-Pressure Sport DS™ Inflatable Kayak from Advanced Elements

Feeds, , , , , , , , , , , ,

Earlier this spring, our first shipment of the new AdvancedFrame Sport DS arrived in port, becoming the fourth addition to the popular Advanced Elements DS series* of high pressure inflatable kayaks.
Manufactured by Advanced Elements exclusively for AirKayaks.com, the new Sport DS features the same footprint as the current low-pressure AE1017 Sport, but with high-pressure floor and upgraded accessories for added comfort and performance.

Following are details on the AdvancedFrame Sport DS AE1017DS, a 10’5″ hi-pressure inflatable weighing in at roughly 28 lbs with an MSRP of $499. (Please note: some of this will be repeated from prior reviews.)
Getting Started with the AdvancedFrame Sport DS Kayak
The box as received weighs 36 lbs, measuring 31 x 18 x 11 inches.

Inside, the rugged carrying case measures 33 x 19 x 11 inches, and houses the kayak body, high-backed lumbar seat, high pressure floor, repair kit, double action pump, gauge and instructions. The kayak and pump in the case weighs 30 lbs, while the kayak and seat alone are 28 lbs. The case has just enough room to include a breakdown paddle (not included). AirKayaks note: Take a good look at how the kayak is folded BEFORE setting up, this will help during breakdown.
AdvancedFrame Sport DS Kayak Setup/Inflation
The instructions are located in a small plastic pocket inside the carrying case. The manual included is for the standard low-pressure Sport, with an additional sheet on using the high-pressure DS floor. The inflation procedure is similar for both versions of the Sport, with the one difference the floor inflation pressure of 4-6 PSI for the dropstitch floor.

Additionally, a short version of the DS inflation can be found on the tag attached to the rear carrying handle.
First step, unfold the kayak. The AdvancedFrame Sport DS – along with all AdvancedFrame models – features an “inner rib” in the bow and stern, which is basically a u-shaped aluminum rib, about a foot long and one-half inch wide.

This comes “pre-assembled” meaning it arrives already inserted into two sleeves inside the kayak cover. Unless you remove the inner bladder, they remain in position. When the kayak is pumped up, the inner bladder with rib presses against the kayak cover – that, in conjunction with two bow and stern plastic sheets, give the kayak a sharp silhouette which aids in slicing through the water.

The kayak features 5 inflation chambers – two military valves and 3 twist-loks. The military-style plunger valves are simple to use – twist up to inflate (this is the closed position where air goes in and doesn’t come out) and down to deflate (air goes in and comes back out).

The pump comes with a screw-on adaptor for the main chamber, but a standard Boston valve adaptor will friction fit

Original Source: AirKayaks >>

Product Review: New AirFusion EVO Dropstitch Inflatable Kayak from Advanced Elements

Feeds, , , , , , , , , , , , , , , ,

Nearly eight years ago, Advanced Elements debuted the original AirFusion kayak – an inflatable hybrid designed to rival the handling and speed of skin-on-frame kayaks. The AirFusion was unique in that it featured a blended design of aluminum alloy frame poles and pressurized air tubes, resulting in a high performance rigid frame system.

This was followed by the AirFusion Elite, which featured a streamlined set up procedure with fewer poles, a wider beam and integrated rear storage hatch.
At last summer’s Outdoor Retailer show, Advanced Elements unveiled their 2018 inflatable kayak product line with announcement of the new AE1042 AirFusion EVO a 6-8 PSI high-pressure model constructed from dropstitch material, with a Barbie-sized 24″ waistline.
Just this week the first AirFusion EVO arrived, a double cardboard box measuring 37 x 25 x 12 inches and weighing in at 47 lbs.
Getting Started with the Advanced Elements AirFusion EVO
The rugged carrying case/backpack houses the kayak body, seat, repair kit, foam floor, screw-on and Boston pin adaptors, instructions (located in the small plastic pocket inside the backpack), two thwarts, nose and stern bags, and anodized aluminum poles. The kayak folded size is approximately 34 x 17 x 8 inches. Everything in the case weighs 37 lbs, while the kayak with seat is 33 lbs. The case has just enough room to include a small pump and breakdown paddle (not included). AirKayaks note: Take a good look at how the kayak is folded BEFORE setting up, this will help during breakdown.
The manual is pretty well-written though initially a little daunting. (AirKayaks note: Some of the initial AirFusion EVO boxes contained instructions for the droptstitch floor. The AirFusion EVO does not use an inflatable floor, so you can just toss those.) After the first read-through it seemed simple enough – piece together the poles, position the floor, pump up side chambers partially, insert bottom pole through the thwarts connecting both ribs, pump up thwarts, finish pumping up side chambers, pump up bow & stern tubes, attach seat, inflate coaming tube. Done!
AirFusion EVO Setup/Inflation

Unfold the kayak body, locating the kayak bow (front) and stern (rear) – this is easy as the integrated storage hatch is located at the stern.

Next, put the foam floor into position, setting the wider end inside the center of the cockpit – this will position the small rectangular cutout over the velcro tab in the floor. Make sure you pull the velcro tab through the cutout. Tip: the foam floor only covers the area where your feet rest.

Layout the bow and stern thwarts. Each of these is tapered. The front airbag (which also acts as a foot brace) is larger than the rear airbag, while the larger side of each airbag faces the cockpit/center. Lay

Original Source: AirKayaks >>

Product Review: New AdvancedFrame Ultralite 17.5lb Inflatable Kayak from Advanced Elements

Feeds, , , , , , , , , , , , , , , ,

At last summer’s Outdoor Retailer show, Advanced Elements unveiled their 2018 inflatable kayak product line with announcement of the new AE3022 AdvancedFrame Ultralite – a redesigned version of the AdvancedFrame Sport, weighing in at a minimalist 17.5 lbs.

We avidly waited for the first shipment to arrive in early March. The boxes had not been off the truck for two hours, before we were headed down to the beach.
So following is our “hot off the truck” review of the new Advanced Elements AdvancedFrame Ultralite – a 10 ft 5-inch performance kayak.
Advanced Elements AdvancedFrame Ultralite
The box as received weighs 29 lbs, measuring 32 x 19 x 11 inches.

The rugged carrying case/backpack houses the kayak body, seat, repair kit, foam floor, screw-on adaptor, instructions (located in the small plastic pocket inside the backpack), foot brace, deck riser and deck pole. The kayak folded size is approximately 29 x 18 x 9 inches. Everything in the case weighs 21.5 lbs, while the kayak with seat is 19.5 lbs. The case has just enough room to include a small pump and breakdown paddle (not included). AirKayaks note: Take a good look at how the kayak is folded BEFORE setting up, this will help during breakdown.
AdvancedFrame Ultralite Kayak Setup/Inflation

First step, unfold the kayak. The AdvancedFrame Ultralite – along with all AdvancedFrame models – features an “inner rib” in the bow and stern, which is basically a u-shaped aluminum rib, about a foot long and one-half inch wide.

This comes “pre-assembled” meaning it arrives already inserted into two sleeves inside the kayak cover. Unless you remove the inner bladder, they remain in position. When the kayak is pumped up, the inner bladder with rib presses against the kayak cover – that, in conjunction with two bow and stern plastic sheets, give the kayak a sharp silhouette which aids in slicing through the water.

Now unroll the foam floor, centering it under the two main chambers, with the narrower side pointing toward the nose. The first time this can be a little tricky – smooth out the hull so it’s not wrinkled and then try to evenly position the foam. This can be fine-tuned later.

The kayak features 2 inflation chambers utilizing military valves and 1 twist-lok. The military-style plunger valves are simple to use – twist up to inflate (this is the closed position where air goes in and doesn’t come out) and down to deflate (air goes in and comes back out).

The kayak comes with a screw-on adaptor (found in the repair kit in the mesh pocket behind the seat) which will fit some pumps based on the hose fittings. Otherwise, a standard Boston valve adaptor will friction fit into the opening. AirKayaks note: Make sure to attach the

Original Source: AirKayaks >>

Product Review: Carbon Nass 12’6″ Inflatable Paddle Board from Hala Gear

Feeds, , , , , , , , , , , , ,

Well-known for eye-catching graphics and innovative technology, Hala Gear is one of the few standup paddle board companies focused on the inflatables market – most feature hard-shells with a few inflatables thrown into the mix.

Original Source: AirKayaks >>

Advanced Elements: AdvancedFrame 2 versus Convertible Inflatable Kayaks

Feeds, , , , , , , , , , , , ,

This past spring, we received first-hand information on Advanced Elements’ new two-person inflatable kayak model, the 13-ft AdvancedFrame 2. Available in limited quantities, the AdvancedFrame 2 combines features from several current models. The kayak is a lightweight and compact version of the popular Convertible kayak with the silhouette of the Expedition, has a floor and seating setup similar to the Lagoon 2, with a higher 450 lbs weight capacity.

Before they arrived, we began fielding numerous questions on which to choose – the Convertible (shown in blue on the bottom) or the AdvancedFrame 2 (shown in green on top). Here are some things to think about.
What’s the same?
Both the Convertible and AdvancedFrame 2 utilize the same type of hull material and three-layer construction, consisting of a kayak outer cover, with PVC side tubes in their own covered fabric sheath. Both have an integrated tracking fin, landing plate and beefed up bow and stern. Both have the removable bow and stern aluminum ribs, and plastic bow and stern stiffening sheets. Both kayaks come with two seats, repair kit, instructions and carrying case (though the carrying case for the AdvancedFrame 2 is generously oversized). Both have 6 inflation chambers – two military valves and four twistloks. Both have two molded rubber handles – bow and stern – and front bungee deck lacking with d-rings and quick-connect clips as well as four rear d-rings. Both have velcro paddleholders.
Both can use the optional rapidup sail, backbone, high-pressure floor and foot pegs.
This is where the similarities end.

At 13 feet in length, the AdvancedFrame 2 is 2 feet shorter than the Convertible, and at 43 lbs with seats in the carrying case, weighs 9 lbs less. While the Convertible features a 1-PSI PVC inflatable floor with i-beam construction, the AdvancedFrame 2 floor does not inflate; it is constructed from a half-inch thick closed-cell foam – similar to that used under sleeping bags (see photo above). The lower “center of gravity” in the AdvancedFrame 2 is compensated for with inflatable seat bases, while the Convertible features a non-inflatable 1-inch seat base with a stiffer, higher back. As the foam floor “rolls” up, the folded dimensions are not quite as compact – hence the larger carrying case.

While both kayaks have open seating areas, the AdvancedFrame 2 has a slim, one-inch coaming area that helps to keep out water, but can not use a deck or spray skirt. The Convertible features a zippered perimeter that allows one to attach optional single and double spray decks (shown above) as well as optional spray skirts.
The Convertible has more flexibility in seating positions, featuring front, rear and center clipping positions. The AdvancedFrame 2 does not have the center clipping position, and the seat straps

Original Source: AirKayaks >>