Tag Archives: airkayak

Product Review: New Kokopelli Twain 13.6 lb Inflatable Tandem Packraft

Feeds, , , , , , , , , , , , , , , ,

We recently posted our Sneak Preview on the new Twain inflatable tandem packraft from Kokopelli Raft Co., an inflatable kayak/packraft for one or two paddlers, weighing in at a mere 13.6 lbs.

For those unfamiliar with the term, “packrafts” are loosely defined as a an inflatable raft weighing under 10 lbs, that can easily be packed/rolled up, making them a great choice for accessing remote locations. While the sport originated in Alaska, the popularity is rapidly expanding globally.
Kokopelli won Gear Junkies “Best In Show Top Gear for 2016” at last summer’s Outdoor Retailer. The current Kokopelli line-up consists of four whitewater models – the Nirvana and Nirvana XL in self-bailing and spray deck versions – joined by three new touring series, the Castaway, Castaway XL and Twain two-person version.
Weights range from 7.3 to 13.8 lbs, with the Castaway XL and Twain sporting removable tracking fins and removable floors. All models come with an inflation “bag” weighing a mere 4 ounces, as well as an inflatable seat(s), though they also can be pumped up using a traditional hand or foot pump. Prices range from $725 to $999 dependent upon the model and options.
While many reviews focus on whitewater backpacking, we will begin with the new touring/flatwater packrafts, in particular the two-person version.
Following is our writeup on the Kokopelli Twain Inflatable Packraft, a 10 ft 2 inch tandem kayak. Please note, some of this will be repeated from prior write-ups.
Getting Started with the Kokopelli Twain:

We unpacked the box and laid out the pieces – inflatable packraft body, inflatable floor, two seat backs, two seat bases, fin, inflator bag, instructions, 2 cinch belts and repair kit. Initial measurements showed the kayak body weighs 9.2 lbs (26 x 13 x 7 inches folded), or 14.5 lbs with everything minus the box. Boxed up, the dimensions are 27 x 14 x 7 inches with a shipping weight of 17.65 lbs.
For the minimalists reading this blog, we have detailed the weights of the individual pieces as follows:

Two seats (four pieces) weigh 21.7 oz. Each seat base is 5.3 oz, measuring 20 x19 inches flat. The seat backs each weigh 5.6 oz and measure 23 x 12.5 inches flat – this includes the webbing and clips.
The floor weighs 3 lbs, measuring 25 x 12 x 1 inch.
The two straps are 2.1 oz., inflator bag 4.4 oz, fin 2.1 oz and repair kit 2.6 oz.

Kokopelli Twain Inflatation and Setup:
The generic instructions include inflation and storage techniques, as well as use of a spray skirt (available for some models) but lack details on actual set up; we will outline the steps we took, below.  In general, set up is straight-forward  – unpack, unfold, inflate.

The first step is to unfold the

Original Source: AirKayaks >>

Product Review: AquaGlide Blackfoot HB Angler XL Inflatable Kayak for 1 or 2 Paddlers

Feeds, , , , , , , , , , , ,

We continue with our series on the new AquaGlide line of inflatable kayaks, specifically the fishing models. We previously reviewed the new high pressure Blackfoot HB Angler SL single-person inflatable kayak followed by the 11-0 Blackfoot Angler Inflatable Paddle Board. We now turn to the Blackfoot HB Angler XL – an elongated 13-foot version which can be set up as the ultimate one-person fishing machine, but can easily switch to a two-person model by adding an optional seat.

Please note, some of this will be repeated from other reviews.
Getting Started with the AquaGlide Blackfoot HB Angler XL:
We unpacked the box and laid out the pieces – inflatable kayak, backpack, instructions, repair kit, foot brace, tracking fin, visor lift, booster seat, adaptor, fishing cooler with rod holders and Core seat.

Initial measurements showed the kayak body with bolster weighs 31.75 lbs while the kayak with seat, fin and brace in the backpack (everything but the cooler) weighs 37.4 lbs. Backpack size (filled) is roughly 27 x 20 x 14 inches. The fishing cooler weighs an additional 3.25 lbs and flattens to 20 x 13 x 3 inches; we did manage to fit it into the backpack. Boxed up, the entire package dimensions are 24 x 20 x 14 inches with a shipping weight of 48 lbs.
(AirKayaks Side note #1: When initially removing the kayak from the carrying case, take a good look at how the kayak is folded. This is probably the most overlooked step and it is VERY helpful when trying to get the kayak back into the bag.)
The included instructions are adequate and include diagrams with inflation details.

Set up is straight-forward and simple  – unpack, unfold, inflate.
There are three inflation chambers utilizing high-pressure military valves – the two side chambers and the floor. The floor is pumped up first.

The military-style plunger valve is simple to use – with your finger, twist the plunger slightly to the “up” position to inflate (air goes in but doesn’t come back out) and “down” to deflate (air comes out).

The Blackfoot HB XL valves require a military valve adaptor, which does not come with most standard pumps. The adaptor was located inside the repair kit.  Friction fit the military valve adaptor onto the Boston valve adaptor (slightly conical-shaped nozzle), then lock onto the military valve with a slight twist. Since the chambers are inflated from 3 to 12 PSI, it is helpful to use a pump with pressure gauge to ensure the kayak is inflated appropriately.
Here we had our first issue – we could not get the adaptor to couple to the valve. From past experience, we found this could be two things. One, the o-ring can be very stiff initially or two, there is such

Original Source: AirKayaks >>

Product Review: New Innova Twist II LN Inflatable Tandem Kayak

Feeds, , , , , , , , , , , , , , ,

In May we received our first shipment of the newly-updated Innova Twist and Swing inflatable kayaks for 2016. Made in the Czech Republic, the Twist and Swing models are now constructed from Light Nitrilon (LN), a lighterweight version of the rugged material used in the traditional Innova Sunny, Helios and Safari models. Light Nitrilon is known for making the kayaks more rigid as well as water and abrasion resistant, without substantially increasing weight. It’s also PVC-free, thus environmentally friendly.

New features also include improved seating and beefed up foot brace. The new seating arrangement is removable and inflatable, making it easier to reposition the paddling locations, optimizing paddling performance and comfort.
This week we had the first opportunity to take out the  revamped Innova Twist II LN, an 11 foot 10-inch two-person inflatable weighing a mere 26 lbs (including seats and foot brace) with a selling price of $549.
Please note: Some of this information will be repeated from prior write-ups.
Innova Twist II: Getting Started
The box as received measures 21.5 x 16 x 10 inches, weighing in at 28.5 lbs.

Inside is the Twist II LN body, cinch strap, multiple instruction sheets, tracking fin, foot rest, repair kit, two seats, bilge sponge and valve adaptor. The Twist II LN body with seats and brace weighs 26 lbs with a folded size of 20 x 15 x 8. AirKayaks note: While the instructions say the Twist II LN comes with a drawstring carrying sack, these were not included in the first shipments. The bags are currently being shipped over and will be added to the boxes.
Innova Twist 2 Setup/Inflatation
We read through the included instruction manuals. As with all the Innova manuals to date, the instructions are quite detailed – there is one instruction sheet for fin installation, one for utilizing the valves, and another on the kayak in general. Most include IKEA-style graphics which are occasionally just short of a brain twister, and while some steps are dauntingly detailed, some are not mentioned.  As the kayaks are made in Europe, many of the details are based around European specs and regulations.

First step, unpack and unfold the kayak body. What is immediately noticeable is how FLAT the kayak is when deflated.

Install the tracking fin before inflating the kayak. The Twist II LN utilizes a single fin with double slots. Slip the end with the larger slot in first, making sure that the fin is pointing towards the “back” of the kayak. This enables it to slide in enough to fit in the second slot. While the first time can be a struggle to get the back side into position, after a couple of rounds it becomes quite easy. Pull up on the fin to ensure you

Original Source: AirKayaks >>

Product Review: AquaGlide 2016 Cascade 12’0″ Inflatable Standup Paddle Board

Feeds, , , , , , , ,

Earlier this year, we received our new 2016 shipment of Aquaglide Cascade inflatable paddle boards consisting of three models ranging in size from 10 to 12 feet. This was subsequently joined by the new AquaGlide Blackfoot Angler 11’0 inflatable SUP.

For 2016, Aquaglide has jazzed up the Cascade image with beefed up graphics, upgraded backpack and redesigned dual action, high pressure pump – still maintaining low price points.  All three Cascades are now 6 inches thick.

The initial production series for the Cascade 12-0 inflatable paddle board lacked front bungee deck lacing – subsequent shipments will come with the deck lacing system as shown two photos above. We were able to purchase a number of these initial run models at a great savings of $300, which we are passing on to our customers. As a bonus, each board comes with a bungee deck lacing kit replete with glue, d-rings, lacing and application instructions. We took our prototype board and followed the instructions, and were surprised at how simple it was. See our write-up on Attaching D-Rings to an Inflatable Paddle Board.
So … our second review will focus on Aquaglide’s new Cascade 12’0″ (without deck lacing, otherwise identical to production model shown in the first photo) – a 14-18 PSI inflatable SUP with a capacity load of 230 lbs. Please note, some of this will be repeated from other write-ups.
Aquaglide Cascade 12’0″ iSUP – Getting Started
The double-boxed board as-arrived is 43 x 27 x 8 inches weighing in at 45 lbs.

Inside is the Cascade 12’0″ body, backpack, repair kit, high pressure pump with gauge and removable fin. The instructions were missing, but we did manage to locate them online – we have attached a link here. Once rolled up, the SUP board and pump fit into the backpack, as well as breakdown paddles, though the backpack is set up to also attach paddles to the outside (the pump is too large). The board itself weighs 26 lbs, or 32.5 lbs inside the backpack with pump – these all easily fit in the back of a small car. Folded up in the bag, the dimensions are 38 x 21 x 8 inches.

For your first set up unroll the SUP body. Lay it out face up so that you can access the military valve.

The Cascade 12-0 utilizes one spring-loaded military valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out). Before you

Original Source: AirKayaks >>

Adding D-Rings to an Inflatable Paddle Board

Feeds, , , , , , , ,

We occasionally get questions on attaching d-rings to inflatable paddle boards. Recently, we had the opportunity to purchase preliminary, production-run 2016 AquaGlide Cascade 12-0 inflatable paddle boards.

As the first run did not include bungee deck lacing on the nose, we were able to make a special purchase on the boards, and AquaGlide supplied the deck lacing kits. While the standard AquaGlide Cascade 12-0 production boards retail for $999, the prototype version – without deck lacing but supplied with the deck lacing kit – sells for $699.
We used this opportunity as a learning tool to pass on our experience. While the following instructions are specific to the AquaGlide Cascade 12 prototypes, the method is fairly universal.
The included AquaGlide instructions make it sound pretty simple:
1) Locate where you want to put the d-rings.
2) Lightly clean the board, removing any printed graphics that might interfere with adhesion.
3) Apply adhesive to board and d-rings, twice.
4) Press down and let dry.

What’s included in the AquaGlide bungee lacing kit: 61 inches of bungee cording, instructions, 4 cloth d-rings on pads, HH-66 vinyl cement with cap brush. (Please note, while this kit is included with the AquaGlide prototype paddle board, it is not available as a separate purchase. You would need to source the d-rings, bungee and vinyl cement if you are planning on applying this to another board.)
What tools you will also need: Large piece of cardboard, pencil, ruler, small 1/2 inch stiff brush, small rag, solvent (see below), credit card or piece of stiff plastic to use as a “roller.”
The instructions direct you to place the center of the d-ring/pads 15″ apart front-to-back and 17″ apart side-to-side. While AquaGlide says the d-rings can be attached to the board inflated or deflated, we pumped the board up somewhat firm, to ensure that everything would be centered, using the following method.

Take one d-ring pad and find the center. To do this, measure the pad side-to-side and top-to-bottom marking the center each time. Then run a pencil mark each direction. The center of the included d-rings was just under 1.25 inches each dimension.
Cut a piece of cardboard to measure 15 inches by 17 inches.

Lay the cardboard across the empty bow of the board, with the 17″ inch side-to-side.  Move it around until it is in the position you want, making sure that it won’t be in the way of paddling. We positioned the end of cardboard 5.5 inches from the end of the deck pad. Then we measured the edge of the cardboard to the blue side rail until it was centered, in this case 2.75″ from the blue side rail on the nose side, and 5 1/8 inches from blue side rail on the deck pad side;

Original Source: AirKayaks >>

New Ultralite 13.6 lb Twain Inflatable Tandem Kayak from Kokopelli Raft Co.

Feeds, , , , , , , , , , , , ,

Last July, AirKayaks had the opportunity to test out a prototype version of Kokopelli Raft Company’s new Twain – an inflatable kayak/packraft for one or two paddlers, weighing in at a mere 13.6 lbs.

For those unfamiliar with the term, “packrafts” are loosely defined as a an inflatable raft weighing under 10 lbs, that can easily be packed/rolled up, making them a great choice for accessing remote locations. While the sport originated in Alaska, the popularity is rapidly expanding globally.

Three years ago, Kokopelli entered the steadily-growing packraft market, introducing the Hornet and Renegade whitewater and flatwater rafts and winning Gear Junkies “Best In Show Top Gear for 2016” at last summer’s Outdoor Retailer.

For 2016, the Kokopelli line-up consists of four whitewater models – the 91″ Nirvana and 104″ Nirvana XL – in self-bailing or integrated spray deck versions weighing in at 8.4 to 10.2 lbs. These are joined by the new touring series featuring the 91″ Castaway and 104″ Castaway XL solo models and the new 122″ Twain two-person version. Weights range from 7.3 to 13.8 lbs, with the Castaway XL and Twain sporting removable tracking fins and removable floors. All models come with an inflation “bag” weighing a mere 4 ounces, as well as an inflatable seat, though they also can be pumped up using a traditional hand or foot pump. Each of the models also includes a TiZip variation, which offers internal storage in the main tubes. Prices range from $875 to $999 dependent upon the model and options.

We were duly impressed with the prototype Twain – it was lightweight, easy to assemble and featured two inflation chambers for added safety. The kayak was easily paddled by one – making it a great choice for those with lots of gear. While some of the ultra-lightweight and shorter kayaks can bob around, the longer silhouette and added tracking fin allows the the Twain to be better seated in the water, and paddle straighter. The addition of an inflatable 4-inch 840 denier floor with side wells provides extra buoyancy and rigidity, allowing the paddler(s) to sit higher, keeping out of the water, yet could be removed for those interested in conserving weight. The open design also offers easy entry and exit as well as a higher paddling position to allow deeper and more efficient paddle strokes.

Eleven-inch diameter tubes constructed from a 210 denier, double-coated nylon, ensure stability on the water as well as providing some protection from swells. One-inch seam welds with reinforced tape ensure durability and the highest-quality, air-holding properties, capable of holding 650 lbs.

The new Kokopelli inflatable rafts are in transit, expected to be here approximately May 10th; Kokopelli completely sold out of their first production run earlier this year, with

Original Source: AirKayaks >>

2016 Advanced Elements AdvancedFrame, Sport and Convertible Kayaks in Stock!

Feeds, , , , , , , , , , , , , , , , ,

This past week we picked up our first shipment of Advanced Elements 2016 models, including the red and green AdvancedFrame, updated Sport in orange, and the popular Convertible tandem in red. Limited quantities are available – and going fast.

New features for the best-selling AE1012 AdvancedFrame include an integrated 1-PSI pressure relief valve in the floor bladder, enhanced high-backed seating, redesigned hardware and the addition of velcro paddle holders. The popular model is now available in two colors – traditional red (AE1012R) and hi-vis green (AE1012G). MSRP $539.
The 2016 AE1007R Convertible in red has also been updated with the integrated pressure relief valve, improved seats and redesigned hardware. Like its sibling, the tandem will feature two colors – traditional red (AE1007R) and hi-vis green (AE1007G – available in June). MSRP $749. Matching decks for the green will be available this summer.
Due to factory relocation, the sought-after AdvancedFrame series has been difficult to obtain over the past several months. As explained by Clay Haller, President of Advanced Elements, Inc., “After nearly 15 years in business, and constantly growing demand for our kayaks, we decided it was time to build a new and much larger factory to accommodate growth for years to come.”
Knowing the popularity of the AdvancedFrame line, AirKayaks attempted to stockpile as much inventory as possible in the event of delays, but were still woefully short of demand.
In the fall of 2015, construction of the new factory was completed however the reopening took longer than anticipated, causing delays in spring 2016 production for several models.
Production has been in full swing for a few months now and Clay is thrilled with the progress. “With some key advancements in machinery and the experience of our seasoned management and production techs, we are seeing the same high-level quality – if not better – that Advanced Elements has always been known for.”
The current shipment featured limited quantities – which are selling quickly. More containers with the 2016 Advanced Elements AdvancedFrame and Convertible models (in both red and the new hi-vis green) are on the water, with expected availability in the first or second week of June. These will be followed with Advanced Elements Sport and Expedition models, towards the end of June.

The current yellow AE1009 Expedition had been retired and replaced with the upgraded, ocean blue Expedition AE1009B at $749. The 2016 Expedition features high-backed seating, diamond ripstop material, integrated storage hatch, sculpted riser bar, pressure relief valve, velcro paddle holders and redesigned hardware.  A variation of the blue Expedition was released in 2015 as the Expedition LTD with the same features in non-ripstop material. AirKayaks has a Special Purchase of the 2015 Expedition LTD model at $599.

The 2016 Sport AE1017 also features the integrated

Original Source: AirKayaks >>

Product Review: AquaGlide Blackfoot Angler 11’0″ Inflatable Standup Paddle Board

Feeds, , , , , , , , , , , , , , , ,

We have recently focused on the new AquaGlide models for 2016 as they’ve arrived over the past few months. A division of North Sports Inc., the Aquaglide brand has grown steadily over the past 15 years, now encompassing inflatable kayaks and standup paddle boards.
To-date, product reviews have included the new BlackFoot SL inflatable fishing kayak and the Cascade 11’0″ inflatable paddle board.

We have been eager to try out the new Blackfoot Angler 11’0″ inflatable SUP, which this year joined the three Cascade recreational models – the Cascades 10’0″, 11’0″ and 12’0″ – as the only fishing-specific model in the AquaGlide  standup paddle board line.
Time and weather came together last week. So, our second board review will focus on Aquaglide’s new Blackfoot 11’0″– a 14-18 PSI inflatable SUP workhorse with a capacity load of 450 lbs. Please note, some of this will be repeated from other write-ups.
Aquaglide Blackfoot 11’0″ iSUP – Getting Started
The double-boxed board as-arrived is 47 x 24 x 8.5 inches weighing in at 47 lbs.

Inside is the Blackfoot 11’0″ body, backpack, repair kit, high pressure pump with gauge and removable fin. The instructions were missing, but we did manage to locate them online – we have attached a link here. Once rolled up, the SUP board and pump fit into the backpack, as well as breakdown paddles, though the backpack is set up to also attach paddles or pump to the outside.
The board itself weighs 29 lbs, or 36 lbs inside the backpack with pump – these all easily fit in the back of a small car. Folded up in the bag, the dimensions are 38 x 21 x 8 inches.

For your first set up unroll the SUP body. Lay it out face up so that you can access the military valve.

The Blackfoot 11-0 utilizes one spring-loaded military valve for inflation. These are very simple to use and feature an inflate mode (spring plunger is UP) and a deflate mode (spring plunger is DOWN). By using your finger to gently push on the plunger, it can be moved to the inflate mode (air goes in and doesn’t come back out) and deflate mode (air goes in and comes back out). Before you go to all the effort of inflating the board, PLEASE make sure the plunger is in the inflate position.
The Blackfoot paddle board we received included the standard AquaGlide wide-barrel, single-action kayak pump with gauge – we understand that subsequent shipments will include the new-style Bravo high-pressure, dual-action hand pump.

First, attach the gauge to the hose, then the hose to the pump handle. Take the military valve adaptor (the one with locking arms) and friction fit it over the Boston valve adaptor, which is attached to the

Original Source: AirKayaks >>

Comparison Table Guide to Selecting an Inflatable Kayak at AirKayaks

Feeds, , , , , , , , , , , ,

As the weather heats up in the Northern Hemisphere, thoughts turn to outdoor activities and “fun-in-the-sun.” If you’ve arrived at this blog article, you’re already intrigued with the idea of paddling across a lake, down a lazy river or along a coastline, and are looking into inflatable kayaks. Maybe you have limited space, want to pack into the back country, need lighter weight options or travel in an RV.  Regardless of the motivation, there are a myriad of choices which can be daunting.

To help you narrow down the field, AirKayaks has put together a table comparing our inflatable kayak options. We have listed the following details – manufacturer, model name and stock number, price range, number of paddlers, kayak lengths, widths, weights, payloads, # of chambers, inflation pressures, design style and kayak type.
We have divided our inflatable kayak list into three sections sorted by kayak style – enclosed, open and sit-on-top – and within that, by length. To help you get going, we describe the attributes of each style first. For further information on inflatable kayak choices, benefits and definitions, please also see our popular guide to Choosing an Inflatable Kayak – What You Should Consider.
Enclosed Design Inflatable Kayaks

The enclosed hull design is similar to many hard shell kayaks; this is shown above in the Advanced Elements AdvancedFrame DS-XL kayak.  The snugger cockpit design keeps excess water and wind from entering the kayak, and also less direct sun. Many of them have coamings (the gray tube in the photo above, encircling the cockpit) that allow you to attach a spray skirt.
 

What is a spray skirt? This is an accessory that attaches to the kayak around the coaming, and then again to your body (shown above on an Innova Swing). The function is to keep out even more wind and water.

Many of the enclosed decks can be zipped open for easy entry or to cool off, but the benefits of the enclosed design include the ability to kayak in windier and colder climates/situations (shown above, the Advanced Elements AirFusion Elite).

A closed-design tandem can also be paddled solo, but it is not as balanced as the paddler must sit in the rear fixed cockpit, rather than the optimal position “just rear of center.” Typically, adding weight to the front will help balance out the kayak (as shown with Eddie sitting in the front cockpit of an Innova Swing 2 inflatable kayak).
Open Design Inflatable Kayaks:

This includes the largest number of kayaks. The open design consists of a kayak with higher walls – which keeps out some water – but a much more open design (shown above on the AquaGlide Chelan Tandem XL for 1-3 paddlers). The benefits include the ability to adjust the

Original Source: AirKayaks >>

Sneak Preview: Updated Swing and Twist Inflatable Kayaks from Innova

Feeds, , , , , , , , , , , ,

Innova Kayak of Burlington, Washington, recently announced changes to their 2016 inflatable kayak line involving the popular PVC-free Twist and Swing models.

New for 2016, both models now feature Light Nitrilon (LN) material.

Light Nitrilon is a lighter-weight version of the rugged Nitrilon material used in the traditional Innova Sunny, Helios and Safari models. The base polyester ripstop material is coated with an outer layer of synthetic rubber, improving longevity as well as making the kayaks more rigid, water and abrasion resistant, without substantially increasing the kayak weight.

The Twist I and Twist II models have also had a design change. Both models now sport improved seating, with removable inflatable seats and beefed up foot braces. The new seating arrangement makes it easier to reposition the paddling point, optimizing paddling performance and comfort.

The Swing I, Swing II and Swing EX now sport improved seating and foot rests, while the cockpits have been stiffened for enhanced spray skirt attachment.
The first shipment of the new Twists and Swings have reached the US, and will start being distributed in late April. MSRP is the same as in 2015, at $449, $549 respectively on the Twist I and Twist II, and $599, $799 on the Swing I and Swing II.

The updated Swing Ex will also remain at 2015 pricing levels of $999, and will be available in May.

Innova’s long-awaited new Halibut inflatable fishing kayak should be available in June.
For updates and details, visit the Innova Product pages at http://www.AirKayaks.com. In anticipation of the new shipment, remaining 2015 inventory of Twists and Swings are now on sale, starting at $399.

Original Source: AirKayaks >>